MEPIS Community Forum

A Linux operating system based on Debian Stable
View unanswered posts | View unsolved topics | View active topics |



Reply to topic  [ 8 posts ] 
Huawei e1550 su Mepis 11 
Author Message
MEPIS Novice
MEPIS  Novice
User avatar

Joined: Sun Aug 07, 2011 6:24 am
Posts: 27
Has thanked: 12 times
Have thanks: 6 times
Post # 281162
Post Huawei e1550 su Mepis 11
Sono molto contento del mio SimplyMEPIS appena installato, però non riesco a connettermi ad internet attraverso la chiavetta in oggetto: non compare nel Network Manager e quindi non posso accedere ad internet, essendo l'unico metodo a mia disposizione. Qualcuno mi può aiutare?

Grazie, Dre


Sun Aug 07, 2011 6:29 am
Profile
MEPIS Enthusiast
MEPIS Enthusiast
User avatar

Joined: Wed Jul 19, 2006 6:13 am
Posts: 8725
Location: Geneva NY
Has thanked: 2347 times
Have thanks: 1535 times
Post # 281164
Post Re: Huawei e1550 su Mepis 11
Benvenuto a MEPIS! Non parlo italiano, ma posso forse aiutare un poco. Necessità sapere alcuni dettagli. Quali sono i risultati di questi comandi come amministratore (su):

Code:
lspci -v | grep -i network
ifconfig

_________________
A Wiki only works when many eyes are on it.

32bit, 3.12-0.bpo.1-686-pae, MX-14, AMD Phenom 9650 Quad-Core, Dell SP2309W with integrated webcam, Nvidia GeForce 6150SE, 4 GB DDR2


Sun Aug 07, 2011 7:58 am
Profile
MEPIS Novice
MEPIS  Novice
User avatar

Joined: Sun Aug 07, 2011 6:24 am
Posts: 27
Has thanked: 12 times
Have thanks: 6 times
Post # 281169
Post Re: Huawei e1550 su Mepis 11
lspci answer:


Usage: lspci [<switches>]

Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree

Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers

Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS

Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only devices with specified ID's

Other options:
-i <file> Use specified ID database instead of network
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)

PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file


ifconfig answer


eth0 Link encap:Ethernet HWaddr 00:18:f3:ab:5a:28
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:22

eth1 Link encap:Ethernet HWaddr 00:18:f3:ab:5d:1c
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:21 Base address:0xc000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:202 errors:0 dropped:0 overruns:0 frame:0
TX packets:202 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15433 (15.0 KiB) TX bytes:15433 (15.0 KiB)

wlan0 Link encap:Ethernet HWaddr 00:15:af:0b:96:d8
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)


Sun Aug 07, 2011 8:42 am
Profile
MEPIS Enthusiast
MEPIS Enthusiast
User avatar

Joined: Wed Jul 19, 2006 6:13 am
Posts: 8725
Location: Geneva NY
Has thanked: 2347 times
Have thanks: 1535 times
Post # 281175
Post Re: Huawei e1550 su Mepis 11
Just for the record (since we have another thread going on this): this returns correctly for me
Code:
lspci -v | grep -i net
Scusi che non so dicere questo in italiano

_________________
A Wiki only works when many eyes are on it.

32bit, 3.12-0.bpo.1-686-pae, MX-14, AMD Phenom 9650 Quad-Core, Dell SP2309W with integrated webcam, Nvidia GeForce 6150SE, 4 GB DDR2


Sun Aug 07, 2011 9:53 am
Profile
MEPIS Novice
MEPIS  Novice
User avatar

Joined: Sun Aug 07, 2011 6:24 am
Posts: 27
Has thanked: 12 times
Have thanks: 6 times
Post # 281189
Post Re: Huawei e1550 su Mepis 11
Adesso funziona: ho scaricato modemmanager dal sito di debian dato che non c'è in synaptic.


Sun Aug 07, 2011 12:37 pm
Profile
MEPIS Enthusiast
MEPIS Enthusiast
User avatar

Joined: Wed Jul 19, 2006 6:13 am
Posts: 8725
Location: Geneva NY
Has thanked: 2347 times
Have thanks: 1535 times
Post # 281192
Post Re: Huawei e1550 su Mepis 11
Quote:
dato che non c'è in synaptic.
ma si:


You do not have the required permissions to view the files attached to this post.

_________________
A Wiki only works when many eyes are on it.

32bit, 3.12-0.bpo.1-686-pae, MX-14, AMD Phenom 9650 Quad-Core, Dell SP2309W with integrated webcam, Nvidia GeForce 6150SE, 4 GB DDR2


Sun Aug 07, 2011 12:40 pm
Profile
MEPIS Novice
MEPIS  Novice
User avatar

Joined: Sun Aug 07, 2011 6:24 am
Posts: 27
Has thanked: 12 times
Have thanks: 6 times
Post # 281194
Post Re: Huawei e1550 su Mepis 11
Che strano! Prima non lo avevo ed ora sì (sara che l'ho installato atrtraverso il deb) Comunque, l'importante è che si è risolto tutto! Grazie ancora.


Sun Aug 07, 2011 12:49 pm
Profile
MEPIS Novice
MEPIS  Novice

Joined: Tue Jul 18, 2006 5:03 pm
Posts: 51
Has thanked: 0 time
Have thanks: 38 times
Post # 285532
Post Re: Huawei e1550 su Mepis 11
la chiavetta di hawai è regolarmente riconosciuta dal kernel , devi configurare la connessione .
La procedura è uguale con qualunque disribuzione , sul mio blog c' è la guida

http://francofait.wordpress.com/2011/07 ... -generale/


Tue Oct 04, 2011 5:56 pm

francofait thanked by: Jerry3904
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.