3.0 Liquorix kernel debs

Those who have created deb or tar packages to share with other MEPIS users can create a thread in this forum to do that. Also those that request someone to create a package for them, can be posted here.
Message
Author
User avatar
lucky9
Forum Veteran
Forum Veteran
Posts: 12345
Joined: Wed Jul 12, 2006 5:54 am

Re: 3.0 Liquorix kernel debs

#51 Postby lucky9 » Fri Nov 04, 2011 5:30 am

I'm sure there's a better way, but I've rebooted many times getting a word or two each time by staring at the screen at a certain place to get an error message.

I should mention that all error messages don't need to have something done.
Yes, even I am dishonest. Not in many ways, but in some. Forty-one, I think it is.
--Mark Twain

User avatar
chippy52
Forum Regular
Forum Regular
Posts: 378
Joined: Wed Jul 29, 2009 6:05 pm

Re: 3.0 Liquorix kernel debs

#52 Postby chippy52 » Sat Nov 05, 2011 8:30 pm

After several reboots I managed to retrieve the messages of concern.


During boot

Setting kernel variables...error: "net.ipv6.conf.all.disable_ipv6" is an unknown key.
error: "net.ipv6.bindv6only" is an unknown key Failed

During shutdwn

Loading cpufreq kernel modules FATAL error inserting powernow_k8 (lib/modules/3.0.0-6.dmz.1-liquorix-amd64/kernel/drivers/powernow_k8.ko) no such device
FATAL error inserting pcc-cpufreq (lib/modules/3.0.0-6.dmz.1-liquorix-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko) no such device

invoke-rc.d Warning: invoke-rc.d samba reload called during shutdown sequence. Enabling safe mode: initscript policy layer disabled.

These don't seem to pose any dire problems, but some explanation as to what causes them would help ease my mind. Any assistance to making adjustments to rectify the messages would also help. I don't like error messages!!
Mepis 11 64bit Linux 3.2.0-0.bpo.4-amd64, KDE 4.5.1
Intel i5 2400, Asus P8H67-M-EVO, G-Skill Ripjaws 2x4GB DDR3-1333, nVidia GeForce GT430, Seagate 500GB sata3 HDD

User avatar
qtech
Forum Regular
Forum Regular
Posts: 693
Joined: Wed Nov 28, 2007 12:21 pm

Re: 3.0 Liquorix kernel debs

#53 Postby qtech » Sat Nov 05, 2011 9:43 pm

chippy52 wrote:After several reboots I managed to retrieve the messages of concern.


During boot

Setting kernel variables...error: "net.ipv6.conf.all.disable_ipv6" is an unknown key.
error: "net.ipv6.bindv6only" is an unknown key Failed

During shutdwn

Loading cpufreq kernel modules FATAL error inserting powernow_k8 (lib/modules/3.0.0-6.dmz.1-liquorix-amd64/kernel/drivers/powernow_k8.ko) no such device
FATAL error inserting pcc-cpufreq (lib/modules/3.0.0-6.dmz.1-liquorix-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko) no such device

invoke-rc.d Warning: invoke-rc.d samba reload called during shutdown sequence. Enabling safe mode: initscript policy layer disabled.

These don't seem to pose any dire problems, but some explanation as to what causes them would help ease my mind. Any assistance to making adjustments to rectify the messages would also help. I don't like error messages!!


Short answer: they are all meaningless errors. You aren't running an AMD CPU, IPv6 has always been disabled and samba is just being noisy.

User avatar
chippy52
Forum Regular
Forum Regular
Posts: 378
Joined: Wed Jul 29, 2009 6:05 pm

Re: 3.0 Liquorix kernel debs

#54 Postby chippy52 » Sun Nov 06, 2011 2:05 am

As stated before I don't seem to have any issues with my setup due to errors. But from a pure non technical point it's a bit scary to see words like " warning, failed, error & FATAL being used. I don't mind getting under the hood & getting my hands dirty if it means I learn more about what makes the system tick. It would be fun to try & remove these errors.
Mepis 11 64bit Linux 3.2.0-0.bpo.4-amd64, KDE 4.5.1
Intel i5 2400, Asus P8H67-M-EVO, G-Skill Ripjaws 2x4GB DDR3-1333, nVidia GeForce GT430, Seagate 500GB sata3 HDD

User avatar
qtech
Forum Regular
Forum Regular
Posts: 693
Joined: Wed Nov 28, 2007 12:21 pm

Re: 3.0 Liquorix kernel debs

#55 Postby qtech » Sun Nov 06, 2011 2:53 am

chippy52 wrote:As stated before I don't seem to have any issues with my setup due to errors. But from a pure non technical point it's a bit scary to see words like " warning, failed, error & FATAL being used. I don't mind getting under the hood & getting my hands dirty if it means I learn more about what makes the system tick. It would be fun to try & remove these errors.


With all due respect, you would largely be wasting your time. If you insist however, then google enabling IPv6 in Linux and how to remove un-needed kernel modules, respectively. I would suspect the samba warning is largely unavoidable. Just keep in mind that if you break it, you get to keep the parts (TM).
;)

harold95
Forum Novice
Forum  Novice
Posts: 50
Joined: Tue Oct 18, 2011 7:37 pm

Re: 3.0 Liquorix kernel debs

#56 Postby harold95 » Sun Nov 20, 2011 8:56 pm

i installed this package, 32 bit version.

i assumed that grub would pick it up and boot from it, but it doesn't show in the grub menu. is there an easy way to add it or update it?
Image

User avatar
richb
Administrator
Posts: 13018
Joined: Wed Jul 12, 2006 2:17 pm

Re: 3.0 Liquorix kernel debs

#57 Postby richb » Sun Nov 20, 2011 9:07 pm

harold95 wrote:i installed this package, 32 bit version.

i assumed that grub would pick it up and boot from it, but it doesn't show in the grub menu. is there an easy way to add it or update it?

First of all a 3.1 kernel deb is available. viewtopic.php?f=39&t=32017.

Update-grub as root in konsole will automatically generate a menu.list that grub will use.
Forum Rules
Guide - How to Ask for Help

Rich

Laptop: Acer V5-572G: Intel i5, 12 GIG mem, Intel graphics, SanDisk SSD, 256GB
Virtualbox: Win 7
Desktop: MX-15- 64, AMD A8 7600 FM2+ CPU R7 Graphics, fglrx driver, 16 GIG Mem. Samsung EVO SSD 250 GB

User avatar
chippy52
Forum Regular
Forum Regular
Posts: 378
Joined: Wed Jul 29, 2009 6:05 pm

Re: 3.0 Liquorix kernel debs

#58 Postby chippy52 » Sun Nov 20, 2011 9:19 pm

You can also go to kmenu >settings >Mepis system assistant >click on repair system boot & reinstall grub bootloader.
Mepis 11 64bit Linux 3.2.0-0.bpo.4-amd64, KDE 4.5.1
Intel i5 2400, Asus P8H67-M-EVO, G-Skill Ripjaws 2x4GB DDR3-1333, nVidia GeForce GT430, Seagate 500GB sata3 HDD


Return to “Package Sharing”

Who is online

Users browsing this forum: No registered users and 2 guests